Pro-Lift-144 Projector Lift

Introduction
Features
Specifications

Introduction

The Pro-Lift-144 Projector Lift supports smooth vertical travel up to 12 feet high on structural rails and anchors into the auditorium’s back wall, hidden behind a 2-piece safety cover with finger guards. This premier design starts with a spacious quiet-ized and well ventilated enclosure that houses high powered cinema projectors, power supplies and 3D attachments. Four side doors on compression locks provide significant access to make servicing projectors efficient. An upper panel connects internal ventilation to a ceiling mounted docking station.

Features

Specifications

Introduction
Features
Specifications

Features

The computerized controller makes this projector lift a “smart” system. Once the Pro-Lift-144 Projector Lift is programmed, it requires no further settings. Speed control, precise start/stop settings, return memory, torque limits and power failure reset are all important features of the programmable Logic Controller (PLC). The “smart” controller program commands a 208V 3-phase servo-motor and high-strength alloy screw drive that are mounted within the vertical rail assembly and connects to the enclosure’s under-carriage. Redundant fail-safe devices are also included. This entire lift assembly ships knocked down for easy transporting.

Introduction

Specifications

Introduction
Features
Specifications

SPECIFICATIONS

Depth	88.94”
Width	41”
Height	130.71”
Return Accuracy	• Vertical: +/- 1/8” @ 60’ • Horizontal: +/- 0.5 degree @ 60’
Travel Speed	• 20 feet per minute preset
Base Plate	• 42W” X 6.75”D X 1/2”H
Beam Clamps	(6plcs) (10-13)” Flanges

Finish	Powder Coat Black
Depth ENCLOSURE	78”
Width ENCLOSURE	41”
Height ENCLOSURE	43.5”
Exhaust	• 10” ducting port to docking plate Intake: • 12” ducting port to docking plate
Sound ISO	Internal 1/2” thick all around
Optical Port Glass	24”X24”