CELLING MOUNT LOUDSPEAKER

Atlas IED SD72WV

Atlas IED SD72WV
Atlas IED SD72WV
Introduction

8" DUAL CONE IN-CEILING LOUDSPEAKER WITH 25V/70V 5-WATT TRANSFORMER AND 62-8 BAFFLE WITH VOLUME CONTROL. The loudspeaker used in the SD72WV is the next generation of Atlas high performance cone loudspeakers, very similar to the preceding C-Series loudspeakers. The similarity in the sonic qualities ensures that contractors and designers who have worked with the AtlasIED C-Series in the past will know exactly what to expect when they use the SD72WV. Model SD72WV is a 25 watt 8" (205mm) loudspeaker with a 10oz. (260g) ceramic magnet. It includes a curvelinear, treated paper cone for lower harmonic distortion. The loudspeaker is also equipped with a full 1" diameter copper voice coil with a black anodized aluminum former for better power dissipation. Model SD72WV operates within a frequency response range of 45Hz-19kHz (nominal) with a sensitivity of 97dB and a dispersion angle of 105°. Package includes factory installed 25/70.7V line matching transformer with tap selections ranging from .25 to 5 watts. The SD72WV includes a factory installed CRS baffle with concealed loudspeaker mounting studs and includes screw mount hardware. The SD72WV baffle features standard mounting holes to accommodate the majority of AtlasIED 8" tile bridges, mounting rings and enclosures. When specifying mounting hardware be advised that the dimensions of the SD72WV baffle match the AtlasIED Model 62-8. The baffle finish is white powder coat epoxy. The baffle mounted volume control has a 5 watt audio rating and is factory wired to the voice coil. Units are shipped assembled, ready for installation.

Features
Specifications
Features
  • 10oz Speaker Provides Familiar Response & Performance
  • Attractive CRS White Powder Coat Baffle with Center Mounted Volume Control
  • Incorporate or Remove Volume Control Knob to Suit Application Requirements
  • Individually Packaged for Stocking & Ordering Convenience
  • Quality 5 Watt-Dual Voltage Transformer
  • ETL Certified, Safety Listed to UL1480 and UL2043.
Introduction
Specifications
SPECIFICATIONS

Speaker Type

Treated Paper

Sensitivity

97dB Average

Frequency Response

100Hz - 10kHz

Impedance

.25, .5, 1, 2, & 5 Watts

Dispersion

105° (2kHz Octave Band, -6dB Points)

Diameter

8 1/8" (20.6375 cm)

CONTACT US
Let us follow up
with you
Our office hours are 9:30am-5:30pm weekdays — please drop by, call us or fill in the contact form so we can reply to you shortly.

1998 NE 150th Street, North Miami,
FL 33181 USA
Phone: (305) 573-7339
Fax: (305) 573-8101
E-mail:
Your message was sent succesfully!

Your e-mail

Your message