Home
Products
L-Acoustics LA12X

L-Acoustics LA12X

Introduction
Features
Specifications

Introduction

The LA12X relies on a proprietary switch mode power supply (SMPS) equipped with a DSP-controlled PFC, capable of delivering 12,000 W regardless of mains voltages (from 240 V down to 100 V.) The PFC offers high immunity to unstable mains and lowers typical power consumption by up to 40% for the same usage conditions i.e., more power is available to the output stages from a given circuit (16 A at 230 V mains, 30 A at 120 V mains). In addition to the high raw RMS power rating, the ability to deliver energy (power x hold time) yields the best performance from loudspeaker systems, especially in LF reproduction.

Features

Specifications

Introduction
Features
Specifications

Features

12,000 W with record hold times
Universal SMPS with Power Factor Correction
High tolerance to unstable mains (100-240V)
Boosted DSP resources
4 x 4 architecture for passive systems
AVB/TSN-ready

Introduction

Specifications

Introduction
Features
Specifications

SPECIFICATIONS

Operating Temperature	Room temperaturefrom 0º C / 32º F to +50º C / 122º F
Amplification class	Class D
Output power	CEA-2006 / 490A (1% THD, 1 kHz, all channels driven), 4 x 1400 W RMS (at 8Ω), 4 x 2600 W RMS (at 4Ω), 4 x 3300 W RMS (at 2.7Ω)
Power supply model	Universal Switched Mode Power Supply (SMPS) with Power Factor Correction (PFC)
Power factor	> 0.9
Mains rating	100 V - 240V ~ ±10%, 50-60 Hz
Nominal current requirements	30A for 100-120V, 16A for 200-240V
Frequency response	20 Hz - 20 kHz, ± 0.1 dB (at 8Ω, 60 W output power), 20 Hz - 20 kHz, ± 0.1 dB (at 4Ω, 120 W output power)

Distortion THD+N (20 Hz - 10 kHz)	< 0.05% (at 8Ω, 60 W output power), < 0.1% (at 4Ω, 120 W output power)
Output dynamic range (20 Hz - 20 kHz, 8Ω, A-weigthed)	> 114 dB
Noise level (20 Hz - 20 kHz, 8Ω, A-weigthed)	< - 72 dBV
Channel separation (at 1 kHz , 4Ω)	> 85 dB
Latency (for both analog and digital inputs)	Standard operating mode: 3.84 ms, Low latency operating mode: 0.76 ms
Digital Signal Processor (DSP)	2 x SHARC 32-bit, floating point, 96 kHz sampling rate
I/O routing	Flexible 4x4 routing matrix