LONG THROW LOUDSPEAKERS

L-Acoustics KARAI

L-Acoustics KARAI
L-Acoustics KARAI
Introduction

The KARAi modular line source element has an operating frequency bandwidth from 55 Hz to 20 kHz. This response can be lowered down to 32 Hz with the addition of the SB18i low frequency extension. KARAi features a 2-way, bi-amplified design and is equipped with 2 x 8” neodymium LF speakers in a bass- reflex tuned enclosure. The HF section features a 3” neodymium diaphragm driver coupled to a DOSC waveguide. The K-shaped coplanar transducer configuration generates a symmetric horizontal coverage of 110° without secondary lobes over the entire frequency range. The combination of coplanar symmetry and DOSC waveguide allows the system to fulfil the 5 WST criteria. Any KARAi line source can be curved up to a maximum of 10 ̊ for each element without breaking the inter-element acoustic coupling. The KARAi enclosure is made of first grade Baltic birch plywood to ensure maximum acoustical and mechanical integrity. The enclosure meets the IP45 rating for protection from solids and liquids. The 4-point rigging system allows suspending up to 12 KARAi in a single array. The KARAi system is driven by the dedicated LA8 amplified controller which ensures active system linearization, intelligent transducer protection, and optimization for 3 operating modes:

  • The “FULL RANGE” mode for standalone line sources arrays or distributed applications.
  • The “HIGH-PASS” mode for fills.
  • The “LOW EXTENSION” mode for SB18i/KARAi configurations.
The performance of KARAi depends upon the choice of electronic preset and physical system configuration.

Features
Specifications
Features
Modular WST line source
  • Compact and lightweight design, compliant with rigging and sightline constraints
  • Extended LF resources for contour requirements from flat to medium
  • Clarity, intelligibility and precision for vocal, speech and lead instruments
  • 110° horizontal directivity for distributed applications, fills and central clusters
  • LA-RAK (LA8) advanced system drive and protection
  • Discreet and accurate rigging system
  • White and architectural RAL color available (KARAi)
Introduction
Specifications
SPECIFICATIONS

Usable bandwidth (-10dB)

55 Hz - 20 kHz ([KARA] preset)

Nominal directivity (-6dB)

Horizontal: 110° symmetric
Vertical: Dependent upon number of elements and line source curvature

Maximum SPL

139 dB ([KARA] preset)

RMS handling capacity

LF: 450 W
HF: 80 W

Components

LF: 2 x 8’’ neodymium
HF: 1 x 3’’ neodymium diaphragm compression driver
Nominal impedance: LF = 8 ohms, HF = 8 ohms

Rigging

Steel, certified for: 12 KARAi (BGV-C1 compliant)
Angle increments: 0, 1, 2, 3, 4, 5, 7.5, 10°

W x H/h x D

713 x 250/186 x 380 mm
28.1 x 9.8/7.3 x 15 in

Weight (net)

3.5 kg/51.7 lbs

Connectors

2 x 4-point Speakon

Protection rating

IP 45

CONTACT US
Let us follow up
with you
Our office hours are 9:30am-5:30pm weekdays — please drop by, call us or fill in the contact form so we can reply to you shortly.

Magna-Tech Electronic Co., Inc.
6114 NW 74th Ave.
Miami FL 33166 USA
Phone: (305) 573-7339
Fax: (305) 573-8101
E-mail:
Your message was sent succesfully!

Your e-mail

Your message