DMX SPLITTER

Martin DMX 5.3 Splitter

Martin DMX 5.3 Splitter
Martin DMX 5.3 Splitter
Introduction

The Martin DMX 5.3 Splitter is the most economical protection for DMX controllers and devices. The main purpose of the Martin 5.3 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read from DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin DMX 5.3 Splitter will help to rectify the signal.

  • 3-pin XLR Input and Outputs DMX Splitter / Booster
  • Opto-isolated DMX Output ports
  • Rack, truss and wall mountable

Features
Specifications
SPECIFICATIONS

D x W x H

125 mm (5.0 in.) x 220 mm (8.7 in.) x 45 mm (1.8 in.)

Weight

0.9 kg (2.0 lbs.)

DMX

ANSI E1.11 (USITT DMX 512-A)

Electrical standard

EIA-485

Recommended cable type

STP (Shielded Twisted Pair)

Recommended cable gauge

22 or 24 AWG

Data input

3-pin XLR male

Data throughput (not amplified or branched)

3-pin XLR female

Data outputs (optically isolated and amplified)

5 x 3-pin XLR female AC

Power input

1.2 m cable tail with US-type (NEMA-5-15) power plug

AC power

100-240 V nominal, 50/60 Hz

Power supply unit

Auto-ranging electronic switch-mode

Typical total power consumption

4 W

Thermal

Maximum ambient temperature (Ta max.): 55° C Minimum ambient temperature (Ta min.): -30° C

Included Items

- 4 x screws to join two devices for rack mounting
- 2 x L-brackets + 8 x screws for 19-inch rack mounting two Splitters (1U) or surface mounting
- 1.2 m (3.9 ft.) hard-wired power cable with US-type (NEMA-5-15) plug

CONTACT US
Let us follow up
with you
Our office hours are 9:30am-5:30pm weekdays — please drop by, call us or fill in the contact form so we can reply to you shortly.

Magna-Tech Electronic Co., Inc.
6114 NW 74th Ave.
Miami FL 33166 USA
Phone: (305) 573-7339
Fax: (305) 573-8101
E-mail:
Your message was sent succesfully!

Your e-mail

Your message