Panasonic PT-RQ50K

Features
Specifications

Features

Achieves Native 4K Resolution at 50,000 lumens*2 with new red laser enhancing blue laser technology in an optimized dual SOLID SHINE laser-phosphor drive system for vibrant, pure, and emotionally powerful color reproduction Swift Setup with Single-Body Design Produces 50,000 lm*2 from the same footprint as Panasonic’s 30,000-lm-class 3-Chip DLP™ laser models. Compact all-in-one body brings significant workflow advantages with simplified transport and installation, and swift setup and adjustment Reliable Operation for Mission-Critical Applications Dualized design features dual solid-state laser-phosphor drives, dual power supplies, redundancy circuits for laser modules, and backup video inputs. Hermetically sealed optics and filter-less design, meanwhile, contribute to 20,000 hours*3 maintenance-free projection in severe conditions

Introduction

Specifications

Features
Specifications

SPECIFICATIONS

Projector type	3-Chip DLP™ projector
DLP™ chip	Panel size 35.1 mm (1.38 in) diagonal (17:9 aspect ratio) Display method DLP™ chip x 3, DLP™ projection system Number of pixels 8,847,360 (4096 x 2160) pixels x 3, total of 26,542,080 pixels
Light source	Laser diodes (Blue LD, Red LD)
Light output*1	50,000 lm
Time until light output declines to 50 %*2	20,000 hours (NORMAL) / 24,000 hours (ECO)

Resolution	4K (DCI) (4096 x 2160 pixels)
Contrast*1	20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Screen size (diagonal)	2.54–25.4 m (100–1,000 in) with new optional lens for PT-RQ50K, 17:9 aspect ratio (depending on lens)
Terminals	MULTI PROJECTOR SYNC IN BNC x 1 MULTI PROJECTOR SYNC OUT BNC x 1 SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant) SERIAL OUT D-sub 9-pin (male) x 1 for link control REMOTE 1 IN M3 x 1 for wired remote control REMOTE 1 OUT M3 x 1 for link control REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel) DIGITAL LINK RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2 LAN RJ-45 x 1 for network, 100Base-TX, compatible with Art-Net, PJLink™ (Class 2) DC OUT USB Type A x 2 (for power supply, DC 5 V, total of 2 A) Expansion Slot 1 Interface Board for 12G-SDI (ET-MDN12G10) supplied Expansion Slot 2 Optional interface boards, SLOT NX compatible