QSC DCM 100 QSC DCM 100
QSC DCM 100
QSC DCM 100
Introduction

DCM Series crossover/monitors are a powerful solution for today's D-Cinema audio systems for installations that use a separate cinema processor such as QSC USL JSD Series processors. The new DCM builds on the legacy of QSC's DCP and DPM products to provide loudspeaker crossover and monitoring functions for Digital Cinema in a Single integrated system. Designed to be used with QSC's Digital Cinema Amplifiers (DCA) and featuring advanced Intrinsic Correction™ settings for QSC's Digital Cinema Speakers (DCS), the DCM optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DCM 100 is configurable for passive and bi-amp operation of three screen channels. The DCM 100 accommodates 2 or 4 surround channels (5.1 or 7.1)

When used with QSC DCS Series cinema loudspeakers, QSC's proprietary Intrinsic Correction adjusts for the intrinsic behaviours of loudspeakers, removing any anomalies from the equation factors that affect measured response and, ultimately, the quality of sound. The result is optimal "out of the box" performance while minimizing on-site room tuning.

Features
Specifications
Features
  • Analog inputs accept audio from cinema processors or other 8 channel analog audio sources
  • QSC Intrinsic Correction DSP Settings for optimal performance of QSC cinema speakers
  • Booth monitor with front panel control for easy operation
  • Passive or 2-way crossovers for three screen channels
  • Compatible with all existing QSC DCA amplifiers
  • Bypass mode - routes audio around failed components to ensure that the show will go on
  • Control and monitoring via Ethernet including full SNMP support
  • Continued development of software and firmware will add new capabilities via easy updates
Introduction
Specifications
SPECIFICATIONS

Dimensions (HxWxD)

3.5"(2 RU) x 19" x 15"

Line voltage requirements

100 VAC – 240 VAC, 50/60 Hz

LCD

128 x 64 bit Monochrome LCD

Monitor output

3.5 mm TRS

Network RJ45

10/100 Mbps network management

DataPort connectors

HD-15 (DCM100 - 8, DCM300 - 11), QSC amplifier interface

Speaker

2"x 3.5" full-range

A/D conversion

24-bit delta-sigma, 48 kHz

Frequency response

20 Hz to 20 kHz (+- .5dB)

Connector

DB25F - 8 channel

Max analog input level

+14.2 dBu (4.0 Vrms)

THD+N at 2 dB below clip

< .003%

CONTACT US
Let us follow up
with you
Our office hours are 9:30am-5:30pm weekdays — please drop by, call us or fill in the contact form so we can reply to you shortly.

Magna-Tech Electronic Co., Inc.
329 Palermo Ave. 1st Floor
Coral Gables, FL 33134-6601 USA
Phone: (305) 573-7339
Fax: (305) 573-8101
E-mail:
Your message was sent succesfully!

Your e-mail

Your message