QSC DCP 100 QSC DCP 100
QSC DCP 100
QSC DCP 100
Features
  • Digital inputs for up to eight channels of audio
  • Network control and monitoring via SNMP
  • Serial automation control via RS-232
  • Analog Inputs for film processors, non-sync and Mic/line
  • Master volume and full 1/3 octave graphic EQ on all channels
  • Booth monitor with touch screen control for easy operation
  • Digital loudspeaker crossovers - three passive or bi-amp screen channels
  • Compatible with all existing DCA amplifiers - thousands of DCA equipped screens are ready for full network monitoring and control
  • Replaces the DCM-1, DCM-10 and DCM-10D for digital projection retrofits
  • Dual power supplies with load sharing for seamless operation in the event of failure
  • SD memory card for quick unit swap - restores all settings
  • Multiple bypass modes routes audio around failed components to insure that the show will go on
  • DCP Manager and DCPNet PC-based application for set-up, control and monitoring
  • DCP Connect mobile app for iPhone and Android provide control and monitoring capabilities via smart phone
  • DSP presets for DCS speakers for great "out of box" performance and reduced set-up time
  • Crossovers support three passive and active 2-way systems
  • Easily integrates with existing film processors for dual film/digital projection systems
  • Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates
  • The DCP 100 is designed expressly for the needs of D-Cinema sound systems
Introduction
Specifications
SPECIFICATIONS

D-Cinema input

DB-25: AES3/EBU channels 1-8

Audio Formats

5.1, 5.1 EX, 7.1 DS

Analog input

DB-25: Analog audio channels 1-8

Universal Mic/Line input

XLR: Mic (+ phantom pwr) or line level

Automation inputs

2 x 6-pin Euro-style (six) digitally-sampled analog control inputs

Serial Control

DB-9 RS-232 serial interface

Control RJ45

10/100 Mbps network management

Output impedance

50 ohms

Nominal output level

-11.8 dBu (200 mV rms)

Loading requirements

RMIN = 2 kΩ, CMAX = 4 nF

Data rate

10/100 Mbps

Line voltage requirements

100–240 VAC, 50/60 Hz

Dimensions (HWD) inches

5.25 × 19 × 15.2

Dimensions (HWD) mm

133 × 483 × 386

Weight

16.6 lb (7.5 kg)

CONTACT US
Let us follow up
with you
Our office hours are 9:30am-5:30pm weekdays — please drop by, call us or fill in the contact form so we can reply to you shortly.

Magna-Tech Electronic Co., Inc.
329 Palermo Ave. 1st Floor
Coral Gables, FL 33134-6601 USA
Phone: (305) 573-7339
Fax: (305) 573-8101
E-mail:
Your message was sent succesfully!

Your e-mail

Your message