Scalable LED Sconce, Remote Power Supply

Tempo Square Sconce

Tempo Square Sconce
Tempo Square Sconce
Introduction

Minimal and clean, the LED Square Sconce is a scalable, classic form – ideal for auditoriums and theatres. Based on the Tempo Configurable Lighting Platform, CLiP®, Square provides limitless opportunities to tailor the scale, illumination and aesthetic to a space. Create a signature design with diffuser and decorative accent options. A 2” or 3”offset mounting bracket creates clearance for sound panels, drapes or curtains around the sconce.

Features
Specifications
Features

CONSTRUCTION

  • Extruded aluminum spine provides structure to scale the sconce from 24” – 72” in 6” increments (36” minimum with 3” offset mounting)
  • Die Cast aluminum LED housing modules and end caps
  • A patent pending two-piece construction simplifies installation. The 2” or 3” offset mounting bracket is installed and wired to the j-box during rough-in. During the finishing phase, the lighting fixture is hooked onto the mounting bracket, aligning the pins to complete the electrical connection.
  • Trim is powder coated in Bronze, Light Silver, Black or White. Special colors available, consult factory.
OPTICS/LENS/DIFFUSER
  • Configure the sconce diffuser to complement any design scheme:
  • Acrylic, white smooth diffuser (WS) provides even surface luminance
  • Select an image or pattern to be printed on vinyl and smoothly adhered to the smooth white diffuser for a truly custom look (VA) Contact Tempo for additional diffuser options or trim features.
POWER SYSTEM
  • 120V Integral Driver
  • ELV and Triac dimming
PERFORMANCE
  • Nominal 6W/ft. Delivered lumens are dependent on the configured diffuser
  • Lumen maintenance is greater than 85% at 86,000 hours for all product configurations (L85 at 86,000 hrs)
  • Power Supply Total Harmonic Distortion <20%, Power Factor >0.9
LIGHT CHARACTERISTICS
  • Available in 2700K, 3000K, 3500K, 4000K color temperature and Red, Green, Blue or Amber. The uplight and downlight modules may be specified with a different color or color temperature than the primary backlight.
  • LED’s are selected and placed on the printed circuit boards via Tempo’s UniBin® process which ensures consistent hue and color within the entire installation Color variations are held to a minimum, within a 2-step MacAdam ellipse.
Introduction
Specifications
CONTACT US
Let us follow up
with you
Our office hours are 9:30am-5:30pm weekdays — please drop by, call us or fill in the contact form so we can reply to you shortly.

Magna-Tech Electronic Co., Inc.
6114 NW 74th Ave.
Miami FL 33166 USA
Phone: (305) 573-7339
Fax: (305) 573-8101
E-mail:
Your message was sent succesfully!

Your e-mail

Your message