The lightweight and ergonomically designed pocket receiver is able to receive up to 8 languages. It is compliant to the IEC 61603-7 and IEC 60914 standard which means it can be used with other equipment compliant to these standards. A large LCD display informs the user with the channel number, language name, volume, battery and reception indication. The receiver can be powered via the rechargeable Ni-MH battery pack with an authonomy of about 52 hours. Using disposal alkaline AA batteries the authonomy can go up to 70h. A built-in recharge circuitry increases the lifetime of the battery. To save on battery consumption the receiver is switched off when the headphone is disconnected. When the received signal becomes too low the audio is muted. If the receiver doesn’ receive any valid IR signal for more than 1 min it switches automatically to standby state. The 270° wide reception angle and built-in error correction ensures a cristal clear sound. even when casually placed. Reception is not influenced by high frequency lighting and stays even optimal used in bright sunlight. The reception test mode can be used for easy checking of the radiator coverage.
Standard |
IEC61603-7 and, IEC60914 |
Headphone load impedance |
> 32 ohm < 2k ohm |
Headphone output level at 2.4V |
450 mVrms / 32 ohm |
IR irradiance level |
4 mW/m² per carrier |
Angle of sensitivity |
270° |
Max. signal to noise ratio |
> 80 dB |
Power Supply |
Ni-MH Battery pack or 2 x AA alkaline |
Power consumption |
35 mA nominal, < 3 mA standby |
Dimensions (mm) |
46(w), 155(h), 24(d) |
Weight excl. battery (g) |
80 |
Weight incl. battery (g) |
135 |
Color |
Black |