Christie CP2309-RGB

Introduction
Features
Specifications

Introduction

Supercharge your small screen cinema with the Christie^® CineLife^™ CP2309-RGB DCI-compliant projector. Featuring patented Christie^® RealLaser^™ solid-state illumination and CineLife electronics, the CP2309-RGB delivers 8500 lumens of brightness, greater than 95% of the Rec. 2020 color space, and a 2000:1 contrast ratio for amazing cinematic experiences.

Advanced laser light source

At the core of Christie RealLaser technology are the Multi-Laser Pack Devices (MPD). These compact, robust, solid-state laser banks comprise of individual emitters populated in a matrix that is specifically tuned for the accurate reproduction of DCI content. With Enhanced Wavelength Diversity (EWD), each MPD features a special configuration of laser diodes making the CP2309-RGB ideal for every type of cinema exhibition, including 3D applications on high-gain silver screens.

All-in-one design

Compact, light and featuring an all-in-one form factor, the CP2309-RGB does not require any external chillers or special pedestals for a seamless installation into any booth. Make the switch to RGB pure laser and benefit from a long lasting and affordable platform that will perform well into the future.

Features

Specifications

Introduction
Features
Specifications

Features

Long-lasting, high-performance light source – Christie RealLaser illumination provides amazing color, high contrast capabilities and is designed to operate for up to 10+ years while maintaining original screen brightness¹
Color realism – An expansive color gamut (>95% of REC. 2020) that provides richer, deeper, and intense colors without filtering or color correction
Compact, all-in-one form factor – No need for external chillers or special pedestals for a seamless installation into any booth
Ultra-low maintenance – Fully-sealed optics allows for zero dust-ingress
Christie CineLife electronics – Streamlined UX-designed interface for simple playback, scheduling and management of cinema content when used with the Christie IMB-S3
Future-proofed – High Frame Rate capable: 2K@120fps
Backwards compatibility – Fully-compatible with existing accessories including the Christie Rack Mount Pedestal and existing cinema lenses for additional cost savings

¹ Some restrictions may apply. Please contact your authorized Christie sales representative for further information.

Introduction

Specifications

Introduction
Features
Specifications

SPECIFICATIONS

Brightness	nominal: up to 9,000 lumens at DCI white (<25○C ambient) expected lifetime: >30,000 hours to 80% brightness (<25○C ambient)
Contrast ratio	2000:1 sequential with standard high brightness lens
Digital micromirror device	0.69” mDC2K 3-chip DMD DLP Cinema® 2048x1080 (2K)
Color gamut	Native: >95% Rec. 2020 coverage
Processing electronics	Christie® CineLife™ Series-3 (Series-2 IMB compatible)1 HDMI v1.4a x2 16-channel AES (w/ Christie IMB-S3 via RJ45 x2) 2K120 / 4K30 fps (w/Christie IMB-S3) Built-in automation controller 3D Sync Connector (12V 1A powered)2
Lens mount configuration	Fully motorized Intelligent Lens System (ILS™)
Lenses	1.2-1.72:1 1.33-2.1:1 1.62-2.7:1 2.09-3.9:1
Input line voltage	Single phase 200-240 VAC

Power input requirements	Input A: 200-240 VAC @ 50-60Hz, 9A Input B (UPS input): 100-240VAC @ 50-60Hz, 9A (8A typical @ 120V)
Cooling	Liquid cooled/TEC, self-contained Heat extraction optional Room heat load w/o extraction: 5698 BTU/hr
Power consumption	1670W @ full load
Laser class	Class 1 – Risk Group 3
Dimensions (Not including lens)	Size: (LxWxH): 42.6x25.0x13.3” (1083x635x337mm) Weight: 160 lbs (73 kg)
Accessories	Christie IMB-S3 (153-100102-XX) NAS-S3 5.4TB storage (153-101103-XX) Rack mount pedestal (108-416102-XX) Rack mount pedestal adaptor (163-111104-XX) Extraction duct adaptor (163-112105-XX) 1 Supports Dolby IMS2000/IMS3000 and GDC SX-3000/SX-4000 2 Supports most conventional 3D systems except “color-separation” based 3D (i.e. 6P). Visit the website for more information.

INSTALLATION LIST

Projects Visit our portfolio page

Projects list More projects in our case study