Four-channel, 600W @ 4Ω Power Amplifier with BLU link, 70V/100V

Crown DCi 4|600N

Introduction
Features
Specifications

Introduction

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Features

Specifications

Introduction
Features
Specifications

Features

ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input. NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers. PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer. DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:

LevelMAX Limiters
Input/Output EQ
Delay
Matrix Mixer
Speaker Line Monitoring

Introduction

Specifications

Introduction
Features
Specifications

SPECIFICATIONS

Frequency Response ( 8 Ohms, 20 Hz - 20 kHz)	+/- 0.25 dB
BLU Link Input Signal to Noise Ratio (A-Weighted)	> 104dB
Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz)	0.35%
Voltage Gain	34 dB
Damping Factor (20 Hz to 100 Hz)	>1000
Input Impedance (nominal balanced, unbalanced)	10 kOhms, 5 kOhms

Maximum Input Level before Compression	+20 dBu
Maximum Fan Noise (re dBA SPL @ 1M)	45
Required AC Mains (+/- 10%)	100V-240V ~ 50/60 Hz
Dimensions	19" x 3.5" x 14.25" (48.3cm x 8.9cm x 35.63cm)
Weight	20.1lbs (9.12kg)