AMPLIFIERS

Crown XTi 1000

Introduction
Features
Specifications

Introduction

The XTi Series of Crown® amplifiers are professional tools designed and built for portable PA applications. The series includes four models which are similar except for output power: XTi 1000, 2000, 4000 and 6000. All are rugged and lightweight, and offer unmatched value in their class. XTi-Series amplifiers feature an LCD screen with speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switch mode universal power supply, useful function indicators, proportional-speed fan-assisted cooling, XLR inputs, Speakon® and binding-post outputs, short-circuit protection and more. With their powerful, reliable performance, XTi-Series amps easily handle 2-ohm loads and are capable of chest-thumping lows. Plus, your investment in an XTi-Series amplifier is backed by Crown’s Three-Year, No-Fault, Fully Transferable Warranty.

Features

Specifications

Introduction
Features
Specifications

Features

Integrated speaker presets with LCD front panel display
Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
Extremely versatile, handling a wide range of speaker impedances and outputs
Switch-mode universal power supply
Speaker presets for crossover frequencies, EQ, limiting, and delay
All products fill 2U rack spaces and weigh under 19 lb (24 lb for XTi 6000); weight sets a new standard in lightweight amps
Speakon® and binding post outputs, XLR inputs and loop-thrus
Comprehensive LED status per channel
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Introduction

Specifications

Introduction
Features
Specifications

SPECIFICATIONS

Frequency Response	+0/–1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms
Load Impedance	Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode. The XTi 1000 A1 (100V version) is rated for 4 to 8 ohms Stereo, 8 to 16 ohms Bridge Mono
Sensitivity	1.4V
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms)	XTi 1K, 2K, 4K: 100 dB (A weighted). XTi 6K: 103 dB (A weighted)
Damping Factor	Better than 500 from 20 Hz to 400 Hz
Crosstalk	> 70 dB below rated power, 20 Hz to 1 kHz
Input Stage	Input is electronically balanced and employs precision 1% resistors

Input Impedance (nominal)	20 k ohms, balanced;10 k ohms, unbalanced
Maximum Input Signal	+22 dBu typical
AC Line Voltage and Frequency Configurations Available	100V, 120V, 220-240V 50/60 Hz
AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch)	6.8A
Operating Temperature	0° C to 40° C at 95% relative humidity (non-condensing)
Dimensions	EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5 in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Weight	18.5 lb (8.4 kg)

INSTALLATION LIST

Projects Visit our portfolio page

Projects list More projects in our case study