Symetrix Jupiter

Introduction

Jupiter

Features

Specifications

Features

Innovative and Unique. Jupiter packages powerful DSP into a zero learning curve, turn-key family of audio processors. Standing on the shoulders of Symetrix’ world-class open architecture DSP platforms, Jupiter upholds our commitment to pristine sound.
3 Audio Input/Output Configurations. Jupiter 4 (4 in, 4 out), Jupiter 8 (8 in, 8 out), and Jupiter 12 (12 in, 4 out).
High Feature to Cost Ratio. Near zero programming time slashes installation costs.
Over 70 Turn-key Apps. Categories include mixing and routing, public address / distribution, sound reinforcement, special purpose DSP. Signal routings, whether simple or complex, are fully tested and ready to go right out of the box. Learn more about the available apps here.
Control Made Easy. Multiple control options include low-cost Symetrix ARC wall panels and an easy to generate SymVue Windows virtual GUI. The human readable Composer Control Protocol supports programming of third-party touch screens and control devices.
An Embedded Web Server for Even More Control. Jupiter’s embedded web server hosts ARC-WEB – a browser-based interface for smart phones, tablets, and computers.
Incredible Sound. An abundance of DSP resources power apps that are packed with features like dynamics, EQ, FIR filters, feedback fighters, loudspeaker management, automixing, and matrixing.
Help is built in. The software connection wizard provides fast and easy IP linking to the DSP hardware.

Introduction

Specifications

SPECIFICATIONS

Number of Inputs	Twelve (12), eight (8), or four (4) switchable balanced mic or line level on Jupiter 12, 8 or 4 respectively.
Connectors	3.81 mm terminal blocks.
Nominal Input Level	+4 dBu line or -36 dBu mic level (software selectable) with 20 dB of headroom.
Mic Pre-amp Gain	+40 dB.
Input Trim	+/- 24 dB.
Maximum Input Level	+23 dBu.
Input Impedance	18 kΩ balanced, > 9 kΩ unbalanced, > 2 kΩ with phantom power engaged.
CMRR	> 50 dB @ 1 kHz, unity gain.
Mic Pre-amp EIN	< -125 dBu, 22 Hz - 22 kHz, 100 Ω source impedance.
Phantom Power	+20 VDC, 20 mA maximum per input.
Number of Outputs	Four (4), eight (8), or four (4) line level on Jupiter 12, 8 or 4 respectively.
Connectors	3.81 mm terminal blocks

Nominal Output Level	+4 dBu line level with 20 dB of headroom. For unbalanced analog output, do not connect the minus output terminal. Unbalanced configuration results in 6 dB lower output level.
Maximum Output Level	+24 dBu.
Output Impedance	200 Ω balanced, 100 Ω unbalanced.
Sample Rate	48 kHz.
Frequency Response	20 Hz - 20 kHz, +/- 0.5 dB.
Dynamic Range	> 110 dB (A-Weighted), input to output.
THD+Noise	< -85 dB (un-weighted); 1 kHz @ +22 dBu with 0 dB gain.
Interchannel Crosstalk	< -90 dB @ 1 kHz, typical.
Latency	< 1.6 ms, input to output with all DSP inactive.
Space Required	1U (WDH: 48.02 cm x 19.05 cm x 4.37 cm / 18.91 in x 7.5 in x 1.72 in), depth is specified from front panel to back of connectors. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
Electrical	100-240 VAC, 50/60 Hz, 25 Watts maximum. Universal input.

INSTALLATION LIST

Projects Visit our portfolio page

Projects list More projects in our case study