Panasonic PT-RQ22K

Introduction
Features
Specifications

Introduction

The PT-RQ22K gives staging innovators an edge where the limits of projection are routinely tested. As the world’s smallest and lightest 20,000-lumen-class 4K+ projector*1, the PT-RQ22K brings unassailable image-quality to body dimensions comparable to our 10,000-lumen-class projectors. Easily handled by fewer people and supporting free 360° installation, novel projection ideas become reality in 4K+. Hermetically sealed optics and filterless heat-pipe-based cooling underline reliability in dusty conditions, while solid-state lasers consistently control the brightness ramp over 20,000 hours*2 of maintenance-free operation. With shared assets across Panasonic’s large-venue lineup enhancing ROI, your transition to 4K+ projection is smooth and cost-effective.

Features

Specifications

Introduction
Features
Specifications

Features

Quick Start and Quick Off
Laser Safety Guaranteed
Built-in Geometric Adjustment
Multi-screen Support System
Multi-Unit Brightness and Color Control
Art-Net DMX, Crestron Connected™, and PJLink™
DICOM Simulation Mode
Waveform Monitor Function
Power Management Reduces Downtime

Introduction

Specifications

Introduction
Features
Specifications

SPECIFICATIONS

Projector type	3-Chip DLP™ projector
DLP™ chip	Panel size 22.9 mm (0.9 in) diagonal (16:10 aspect ratio) Display method DLP™ chip x 3 Pixels 4,096,000 (2560 × 1600) × 3, total of 12,288,000 pixels, 49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON
Refresh rate	240 Hz*1
Light output	20,000 lm2 / 21,000 lm (Center)3
Time until light output declines to 50 %*4	20,000 hours (NORMAL) /24,000 hours (ECO)
Resolution	4K+ (5120 x 3200 pixels) (Quad Pixel Drive: ON)
Contrast*2	20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)

Screen size (diagonal)	1.78–25.4 m (70–1,000 in) with 16:10 aspect ratio 1.78–15.24 m (70–600 in) with the ET-D75LE8 / ET-D3LET80, 16:10 aspect ratio 3.05–15.24 m (120–600 in) with the ET-D75LE95, 16:10 aspect ratio
Lens	Optional (no lens included with this model)
Lens shift*5	Vertical (from center of screen) ±59 % (±56 % with ET-D75LE6 / ET-D3LEW60, +69 % – +84 % with ET-D75LE95) (powered) Horizontal (from center of screen) ±29 % (±19 % with ET-D75LE6 / ET-D3LEW60, ±21 % with ET-D75LE95) (powered)
Terminals	SDI 1 IN BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link A), Dual-link 3G-SDI (Link 1), Quad-link HD-SDI (Link 1), Quad-link 3G-SDI (Link 1) SDI 2 IN BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link B), Dual-link 3G-SDI (Link 2), Quad-link HD-SDI (Link 2), Quad-link 3G-SDI (Link 2) SDI 3 IN BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link A), Dual-link 3G-SDI (Link 1), Quad-link HD-SDI (Link 3), Quad-link 3G-SDI (Link 3) SDI 4 IN BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link B), Dual-link 3G-SDI (Link 2), Quad-link HD-SDI (Link 4), Quad-link 3G-SDI (Link 4) MULTI PROJECTOR SYNC IN BNC x 1 MULTI PROJECTOR SYNC OUT BNC x 1 SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant) SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant) REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control REMOTE 1 OUT M3 stereo mini-jack x 1 for link control REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel) DIGITAL LINK/LAN RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2 DC OUT USB Type A x 2 (for power supply DC 5 V total of 2 A) Expansion Slot SLOT 1 / SLOT 2 (total two terminals, vacant) for interface boards, SLOT NX compatible
Dimensions (W x H x D)	600 mm x 307 mm7 x 745 mm ( 23 5/8˝ x 12 3/32˝ x 29 11/32˝ ) ( including protruding parts ); 598 mm x 270 mm8 x 725 mm ( 23 17/32˝ x 10 5/8˝ x 28 17/32˝ ) ( not including protruding parts )
Weight	54.0 kg (119 lbs)

INSTALLATION LIST

Projects Visit our portfolio page

Projects list More projects in our case study