The MAC Viper Quadray is a never-before-seen, multiple-beam effect that adds a whole new dimension to the lighting designer toolbox. Available as an easy-to-install front lens replacement kit for any standard MAC Viper AirFX, the Quadray allows for projection of 1, 2, 3 or 4 individually-controllable rays of light for all-new static or dynamic possibilities in mid-air effects. It includes an efficient effects engine that allows designers to create a whole new variety of looks that would otherwise be hard, or even impossible, to program via a lighting console. The MAC Viper Quadray houses the same high-quality feature set as the MAC Viper AirFX, including a vibrant color mixing system and stunning aerial effects, and has inherited the same compact form, impressive speed and superior light quality from a 1000-watt lamp.
Physical |
Length (Head): 566 mm (22.3 in.) Width: 473 mm (18.6 in.) Width (Base): 335 mm (13.2 in.) Height (head straight up): 732 mm (28.8 in.) Height (maximum): 749 mm (29.5 in.) Weight: 36.1 kg (79.6 in.) |
Electrical |
AC power: 120-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Typical half-cycle RMS inrush current: 16.2 A |
Dynamic Effects |
Beam effects: 1 - 4 individually controllable rotating beams Color mixing: CMY, independently variable 0 - 100% Color temperature control: CTO, variable 6000 - 3200 K Color wheel: 7 interchangeable dichroic filters + open, indexing, continuous rotation, random color Rotating aerial effects: 5 interchangeable rotating aerial effect gobos, wheel and gobo indexing, continuous rotation and shake Static gobo wheel: Interchangeable wheel with 7 integral gobos, wheel indexing and continuous rotation, random gobo Wash effect: Fade in/out Iris: 0 - 100%, pulse effects Mechanical dimmer/shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout Dimming options: Choice of four dimming curves Zoom: Motorized Pan: 540° Tilt: 268° Position correction system: Absolute position monitoring |
Control and Programming |
DMX channels: 20/28 Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX 16-bit control: Dimmer, aerial effect indexing, focus, zoom, pan and tilt DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Receiver: Opto-isolated RS-485 Firmware update: USB memory device or USB/DMX hardware interface over DMX link |
Lamp |
Type: 1000 W short-arc discharge Color temperature: 6000 K CRI (Color rendering index): >85 Average lifetime: 750 hours Socket: PGJX36 Ballast: Electronic Approved lamps: Osram Lok-it! 1000/PS Brilliant, Philips MSR Gold MiniFastFit 1000W |
Optics |
Zoom range: 12.5-51° (1:4) Output: 20 000 lm |
Gobos |
Size: E27 (Size E, max. image diameter 27 mm) Approved material: Borosilicate 3.3 or better with dichroic or heavy matted aluminum coating (metal gobos not approved) Outside diameter: 37.5 mm +0/- 0.2 mm (1.5 in. +0/- 0.01 in.) Maximum image diameter: 27 mm (1.1 in.) Maximum thickness: 1.1 mm +/- 0.1 mm (0.1 in. +/- 0.01 in.) |
Installation |
Mounting points: Eight quarter-turn locking points Orientation: Any Minimum distance to illuminated surfaces: 3.4 m (11.2 ft.) Minimum distance to combustible materials: 0.3 m (1.0 ft.) |
Connections |
AC power input: Neutrik PowerCon DMX and RDM data in/out: 5-pin locking XLR USB memory devices: USB host socket |