BC-2824-6 BEAM CLAMP | 2-6 inch Offset Hang Point

BC-2824-6 BEAM CLAMP | 2-6 inch Offset Hang Point BC-2824-6 BEAM CLAMP | 2-6 inch Offset Hang Point BC-2824-6 BEAM CLAMP | 2-6 inch Offset Hang Point
BC-2824-6 BEAM CLAMP | 2-6 inch Offset Hang Point
BC-2824-6 BEAM CLAMP | 2-6 inch Offset Hang Point BC-2824-6 BEAM CLAMP | 2-6 inch Offset Hang Point
Introduction

This hook style beam clamp is adjustable and mounts flush underneath the building’s I-Beam’s flange. Use the BC-2824-6 hook style beam clamp to provide a load rated overhead rigging point from structural I-Beams with widths ranging between 2” and 6”. This beam clamp model provides a fast, easy and safe way to rig direct loads, bridles and hitches from overhead and a hand wrench is all that is required to secure this clamp. The beam flanges must be parallel to the floor.

Features
Specifications
Features
  • For beams with width between 2” and 6”
  • Accommodates ½ – 13 threaded rod.
  • For overhead vertical suspension applications.
Introduction
Specifications
SPECIFICATIONS

Material

Structural Steel Grade B7 Threaded Rod

Finish

Bright Zinc

Design Factor

7:1

WLL

178.5 lbs / 81.1 Kg

Shipping Weight

1.25 lbs / .57 Kg

CONTACT US
Let us follow up
with you
Our office hours are 9:30am-5:30pm weekdays — please drop by, call us or fill in the contact form so we can reply to you shortly.

Magna-Tech Electronic Co., Inc.
6114 NW 74th Ave.
Miami FL 33166 USA
Phone: (305) 573-7339
Fax: (305) 573-8101
E-mail:
Your message was sent succesfully!

Your e-mail

Your message