AMPLIFIERS

Crown CTs 3000

Introduction
Features
Specifications

Introduction

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

Features

Specifications

Introduction
Features
Specifications

Features

High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
Crown Switching Power Supply for lighter weight
Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
Comprehensive array of indicators provide accurate diagnostics
Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory module

Introduction

Specifications

Introduction
Features
Specifications

SPECIFICATIONS

Channels	2
Sensitivity	1.4 V
Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted)	105 dB
THD (full rated power, 20 Hz - 20 kHz)	< 0.35%
Crosstalk (below rated power) 20 Hz to 1 kHz	> 80 dB
Frequency Response (at 1W, 4/8 ohms)	+/- 0.25 dB
Common Mode Rejection (20 Hz to 1 kHz)	> 50 dB

Maximum Input Level before Compression	+20dBu
Load Impedance	70V, 100V (2-16 Ohms)
Voltage Gain (at maximum level settings) (8/4 ohm operation)	35:1 (31 dB)
Power Draw at Idle (120VAC mains: standby mode)	35W
Dimensions	3.5" x 19" x 14.25"
Weight	22.8lbs
Damping Factor (10 Hz to 100 Hz)	<3000