Crown's DSi 8Mn is a projection booth monitor designed to work with digital cinema systems using the Crown DSi Series amplifiers. Created to meet remote-level and remote-audio monitoring requirements, the DSi 8Mn is an integral part of Crown's cinema solutions.
Voltage Gain |
37.1 at 1 kHz |
Frequency Response |
+0/-1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms |
Load Impedance |
Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode. DSi A1 (100V version) is rated for 4 to 8 ohms in Stereo mode, 8 to 16 ohms in Bridge-Mono mode. |
Sensitivity |
at 8 ohm rated output: 1.4V, at 4 ohm rated output: 1.3V, At 2 ohm rated output: 1.1V |
Signal to Noise Ratio |
(below rated 8-ohm power at 1 kHz) 100db (A-weighted) |
Damping Factor |
Better than 500 from 20 Hz to 400 Hz |
Crosstalk |
> 70 dB below rated power, 20 Hz to 1 kHz, A-weighted |
Input Stage |
Input is electronically balanced and employs precision 1% resistors |
Input Impedance (nominal) |
20 k ohms, balanced; 10 k ohms, unbalanced |
AC Line Voltage and Frequency Configurations Available |
100V, 120V, 220-240V, 50/60 Hz |
IEC Power Connector |
20A |