DCM Series crossover/monitors are a powerful solution for today's D-Cinema audio systems for installations that use a separate cinema processor such as QSC USL JSD Series processors. The new DCM builds on the legacy of QSC's DCP and DPM products to provide loudspeaker crossover and monitoring functions for Digital Cinema in a Single integrated system. Designed to be used with QSC's Digital Cinema Amplifiers (DCA) and featuring advanced Intrinsic Correction™ settings for QSC's Digital Cinema Speakers (DCS), the DCM optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DCM 300 is configurable for tri- or quad- amp operation for three screen channels. The DCM 300 accommodates 2 or 4 surround channels (5.1 or 7.1)
When used with QSC DCS Series cinema loudspeakers, QSC's proprietary Intrinsic Correction adjusts for the intrinsic behaviours of loudspeakers, removing any anomalies from the equation factors that affect measured response and, ultimately, the quality of sound. The result is optimal "out of the box" performance while minimizing on-site room tuning.
Dimensions (HxWxD) |
3.5"(2 RU) x 19" x 15" |
Line voltage requirements |
100 VAC – 240 VAC, 50/60 Hz |
LCD |
128 x 64 bit Monochrome LCD |
Network RJ45 |
10/100 Mbps network management |
RS232 |
DB-9 Serial Interface |
Speaker |
2"x 3.5" full-range |
Amplifier output power |
10 watts Class D |
A/D conversion |
24-bit delta-sigma, 48 kHz |
Frequency response |
20 Hz to 20 kHz (+- .5dB) |
Connector |
DB25F - 8 channel |
Max analog input level |
+14.2 dBu (4.0 Vrms) |
THD+N at 2 dB below clip |
THD+N at 2 dB below clip |