• Digital input for up to 16 channels of audio
  • Networked audio I/O via CobraNet - supports behind-the-screen mounting of DXP processors for screen channel and subwoofer DCA amplifiers
  • Handling crossovers and amp connections for screen channels via DXP allows the DCP 200 to offer DCP 300 functionality at a significant savings
  • Network control and monitoring via SNMP
  • Serial automation control via RS-232
  • Analog inputs for film processors, non-sync and mic/line
  • Master volume and full 1/3 octave graphic EQ on all channels
  • Booth monitor with touch screen control for easy operation
  • DataPorts for surround channel amplifiers
  • Compatible with all existing DCA amplifiers - thousands of DCA equipped screens are ready for full network monitoring and control
  • Dual power supplies with load sharing for seamless operation in the event of failure
  • SD memory card for quick unit swap - restores all settings
  • Multiple bypass modes routes audio around failed components to insure that the show will go on
  • DCP Manager and DCPNet PC-based application for set-up, control and monitoring
  • DCP Connect mobile app for iPhone and Android provide control and monitoring capabilities via smart phone
  • Easily integrates with existing film processors for dual film/digital projection systems
  • CobraNet offers digital audio routing via DXP processors
  • Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates
  • The DCP 200 is designed expressly for the needs of D-Cinema sound systems

D-Cinema input group 1

DB-25: AES3/EBU channels 1-8

D-Cinema input group 2

DB-25: AES3/EBU channels 9-16

Main analog input

DB-25: Analog audio channels 1-8

Extended surround input

DB-25: Surround and Le/Re channels

Automation inputs

2 x 6-pin Euro-style (six) digitally-sampled analog control inputs

Control RJ45

10/100 Mbps network management

CobraNet RJ45s

100 Mbps primary/backup network audio

Output impedance

50 ohms

Nominal output level

-11.8 dBu (200 mV rms)

Loading requirements

RMIN = 2 kΩ, CMAX = 4 nF

Line voltage requirements

100 VAC - 240 VAC, 50/60 Hz

Dimensions (HWD) inches

5.25 × 19 × 15.2

Dimensions (HWD) mm

133 × 483 × 386


16.6 lb (7.5 kg)

Let us follow up
with you
Our office hours are 9:30am-5:30pm weekdays — please drop by, call us or fill in the contact form so we can reply to you shortly.

Magna-Tech Electronic Co., Inc.
6114 NW 74th Ave.
Miami FL 33166 USA
Phone: (305) 573-7339
Fax: (305) 573-8101
Your message was sent succesfully!

Your e-mail

Your message